Replacement liner lock for the FX Panthera which is required as part of the Caliber Exchange kit or to replace your orginal lock nut.
[Need the whole kit? Find it Here - Panthera Caliber Exchange Set .22 , Panthera Caliber Exchange Set .25, Panthera Caliber Exchange Set .30]
IMPORTANT NOTES FROM HUMA AIR:
- FX uses a medium strength treadlocker to fixate the transferport to the barrel to prevent the barrel coming loose. We strongly advice you to use a treadlocking adhesive like Loctite® 2400.
- Please check the FX Factory Exploded View before dismanteling the rifle.
- Barrel system A1-A18 runs thru a pressurized tube, faulty dismantling or faulty re-assembly can cause serious injury to yourself and other living beings in the proximity and can cause serious damage to the gun and property close by.
- Locking screw A11 holds the barrel system which runs thru a pressurized tube, faulty dismantling or faulty re-assembly ccan cause serious injury to yourself and other living beings in the proximity and can cause serious damage to the gun and property close by.
- Changing from a larger caliber to a smaller caliber does not require any modifications to your shroud or moderator, because the bore of the shroud and moderator will be large enough.
- When you go upwards to a larger caliber, you need to check the bore of the shroud and moderator, and if needed open up the diameter of the bore of the shroud and moderator to match your new caliber.
- Minimum bore diameter for shroud would be:
- Cal .22 = 6,5 - 7 mm. bore
- Cal .25 = 7,5 - 8 mm. bore
- Cal. 30 = 8,5 - 9 mm. bore