Modular Airgun Silencer, MOD50-4/0 pre-assembled with 4x40 mm. modules (Standard)

This silencer is the largest in diameter in the range of Huma-Air modular air moderators. It consists of an extra long start chamber with vent holes to dissipate the excessive air from the muzzle blast and is equipped with fixed female treads (available in several sizes), three extra 40 mm long volume chambers and an endcap. This modular system allows you to configure your own silencer in terms of length, caliber, volume chamber size and content of the internal silencer chambers. By mixing these variables you can influence the frequency and output decibels of your silencer and adjust them perfectly for your rifle.

Original MOD 50-4/0 VS. MOD 50-4/0 Avalanche:

• MOD50-4/0 - All three chambers are filled with a metal mesh sleeve and special Kevlar ® reinforced ballistic fibers to minimize the sound.
• MOD50-4/0 Avalanche - All three aluminum chambers are filled with a CNC produced insert made of technical polymer Pom-C. This insert is designed with a special geometry to reduce the sound of the air blast to an absolute minimum and due its extreme strength there are no power limits. 

The benefits of the Huma-Air Modular Silencer:

• The modular aspect makes it possible to create a rifle specific moderator, allowing you to reduce the output noise to an absolute minimum.
• The precision machined volume chambers are screwed into each other making it very easy to switch or change the setup.
• You can add or remove 40 mm or 20 mm long volume chambers to the setup.
• You can also choose to use maximum volume, without the standard inserts in the volume chambers.
• The system is caliber specific in a .25, a .30 or a .35 model. Of course you can use a .25 model also for .22 and .177 too.

Specifications:
 
Material - Aircraft Aluminium
Number of 40 mm chambers - Start module + 3 extra chambers
Number of 20 mm chambers - 0
Weight - 311 Gram.
Length - 220 mm.
Diameter (Outside) - 50 mm.
Thread size - 1/2UNFx20 - M18x1

*DISCLAIMER: These products are INTENDED for the use on airguns only.  It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your state, county and city and to fully comply with them.